in
All Tags » pix (RSS)

Browse by Tags

  • Cisco PIX and no nat

    Hello, I have configured a pix 501 and everything works OK when I have nat configured to use a translated address on the outside interface (ie - I can ping hosts on the outside network from the internal network. However, I don't want to use nat - I don't want the inside addresses translated....
    Posted to Misc (Forum) by network on 03-13-2010

  • Cisco PIX IPSec VPN tunnel question

    hi, I would like to set up the VPN IPSec tunnels between two PIXes. 10.0.2.0 and 10.1.8.0 network. I want users from 10.0.2 network able to connect to 10.1.8 network but blocking anyone from 10.1.8 network coming into 10.0.2. Is it possible to do so? Any help is deeply appreciated. thanks Duc
    Posted to Misc (Forum) by network on 03-09-2010

  • PIX Firewall with Surfcontrol Server: Illegal Traffic not Blocked

    I currently have a PIX 501 firewall connected to my ISP, and behind that I have 3 switches trunked off of each other with one connection back to the PIX. I mirrored a port on switch A where it connects to the PIX and my Win2003 SP1 Server (Surfcontrol Server 5.0) is the box receiving the mirrored info...
    Posted to Misc (Forum) by network on 03-03-2010

  • Cisco PIX 515 with DMZ setup

    I am planning to replace an IPCop (linux) firewall with a Cisco PIX 515 with DMZ, and need some assistance to what has to be set up to achieve the following: - Outside public IP 84.x.x.150, subnet 255.255.255.252, default gw 84.x.x.149 - Inside IP's (official) in 217.x.x.128 network (adresses 129...
    Posted to Misc (Forum) by network on 02-26-2010

  • Cisco Pix 506E Site-to-Site-to-Site VPN Configuration

    Hi Experts, I have the following scenario. Site A ------- Internal IP Range: 10.0.0.0 / 255.255.255.0 Example Site A has 1 Static IP from ISP = 61.88.99.100 Cisco 506E -> ADSL Modem Site B ------- Internal IP Range: 10.0.1.0 / 255.255.255.0 Example Site B has 1 Static IP from ISP = 61.88.99.103 Cisco...
    Posted to Misc (Forum) by network on 02-22-2010

  • PIX 515 Web Interface

    How do I enable the Cisco PIX 515's Web Interface?
    Posted to Misc (Forum) by network on 02-20-2010

  • Cisco Pix Port Forwarding

    Hello I am trying to do the following. Asume one static external IP on a pix. and 3 internal ips I am hoping for a configuration that will forward requests on that single ip to internal machines by port(done this on so many soho firewalls, im sure cisco must be able to do it!) SO.. Someone comes in on...
    Posted to Misc (Forum) by network on 02-16-2010

  • Setting up an IPSec VPN tunnel

    I have been attemtping to set up an IPSec VPN tunnel between a remote site and my network using a Cisco 501 Pix firewall at the remote site and my Cisco 3000 VPN Concentrator here at the main site, over an SBC DSL line. This is my first attempt at this. This question involves several aspects. 1. How...
    Posted to Misc (Forum) by network on 02-16-2010

  • How to Configure Cisco PIX 515e to allow ftp traffic.

    I am having problems configuring a PIX 515e to allow ftp traffic to a Linux box running vsftpd (PASV) The ftp box is at 10.1.19.12 and I am able to ftp from inside but am having problems hitting it from outside. The outside IP address I have for the ftp server is 206.169.207.165 Attached is my config...
    Posted to Misc (Forum) by network on 02-11-2010

  • PIX InterVlan Routing

    The Setup: VPNClient 4.6 --- Internet --- (outside) PIX 515 (3 inside subinterfaces VLAN 2, 3, 9) --- CAT 4506 INSIDE subinterfaces on PIX VLAN 2 (192.168.2.0/24) VLAN 3 (192.168.3.0/24) VLAN 9 (192.168.9.0/24 - DMZ) VPN Client receives a 192.168.2.X (VLAN 2) address from VPN IP-Pool. The Question: What...
    Posted to Misc (Forum) by network on 02-11-2010
Page 1 of 21 (207 items) 1 2 3 4 5 Next > ... Last ยป