Cisco 800 adsl

Hi,

I have a cisco 800 series router (built in modem) connected to an adsl line. The problem is my pc's can't get out onto the internet (The router can) I think I have cocked up the dialer config part as I get confused on the dialer0 or dialer1 virtual interfaces. Im not sure the NAT is correct either :S maybe there refferencing the wronf interfaces..... heres my config:

Code Snippet:

         
           
             1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:

           
           
             !This is the running config of the router: 10.10.10.1
!----------------------------------------------------------------------------
!version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco_800
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 jO$4RP8i/hdPnY6RRrjoaVn0.
!
no aaa new-model
!

no ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
   import all
   network 10.10.10.0 255.255.255.0
   default-router 10.10.10.1 
   dns-server 208.67.222.222 208.67.220.220 10.10.10.1 
   domain-name zen.com
   lease 0 2
!
!
ip cef
no ip bootp server
ip domain name zen.com
ip name-server 208.67.222.222
ip name-server 208.67.220.220
!
!
!
username admin password 0 aragorn02
! 
!
archive
 log config
  hidekeys
!
!
!
!
!
interface ATM0
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 no ip mroute-cache
 no atm ilmi-keepalive
 pvc 0/38 
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
 dsl operating-mode auto 
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
 ip address 10.10.10.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1452
!
interface Dialer1
 ip address negotiated
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 no cdp enable
 ppp chap hostname hostname@isp
 ppp chap password 0 1234567
 ppp ipcp dns request
 ppp ipcp address accept
!
interface Dialer0
 no ip address
 no cdp enable
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
!
ip http server
ip http access-class 23
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat pool Lan_to_External 10.10.10.0 10.10.10.200 netmask 255.255.255.0
ip nat inside source list 1 interface Dialer0 overload
!
access-list 1 permit 10.10.10.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
!
control-plane
!
banner exec ^C

!
line con 0
 login local
 no modem enable
line aux 0
line vty 0 4
 access-class 23 in
 privilege level 15
 password aragorn02
 login local
 transport input telnet ssh
!
scheduler max-task-time 5000
end


Thanks 
T4K

           
         

Open in New Window

Select All

Solution: Cisco 800 adsl

oops ,, my mistake

add it with no ::

ip nat inside source list 1 interface Dialer1 overload

Popular Tags

Browse All Tags